If your Valparaiso home loses heating or cooling and your HVAC has a red blinking light flashing on the unit, it typically indicates an error or malfunction. The exact meaning of the red blinking light can vary depending on the furnace brand and model. On this page, you’ll discover what the blinking red light means on virtually every HVAC Repair in Valparaiso and Chesterton!
You’ll also discover the best solutions. We’ll break down every indicator, every brand and when the solution can be resolved without calling a HVAC contractor. As Valpo’s longest-running HVAC Repair company, Crown Wheele has 75 years of experience and has worked on every make and model of Heat Pump and HVAC. Today, you’ll discover the peace of mind that comes with knowledge!
The Blinking Red Light on Your HVAC indicates the Repair
Every modern HVAC comes with these red blinking lights that indicate something isn’t right.
The good news is that these blinking lights are your HVAC telling you your home’s furnace or air conditioning needs a little HVAC maintenance or repairs. But before assuming the worst, these blinking lights often mean a solution can be found by simply changing your filter or restarting your thermostat.
But it can also indicate that something isn’t right with your system, and you’ll need furnace repair or ac maintenance. Typically, the red blinking light differs from that of most leading brands. However, as Valparaiso’s longest-running HVAC company with 75 years of experience, we are certified to work on all leading HVAC companies and maintain a downtown Valpo warehouse with parts and components for most brands.
AIR CONDITIONING REPAIR HEAT PUMP REPAIR FURNACE REPAIR
Red Blinking Light Indicator for Most HVAC Brands
The red blinking light can often indicate a minor issue or indicate regular maintenance is needed. However, these blinking lights should be taken seriously, as they can demonstrate a severe issue critical to your family’s comfort and safety.
For instance, if the red blinking light indicates a bad blower motor or a flame sensor if left unaddressed, it could lead to the failure of the furnace, air conditioner, or heat pump.
The red blinking HVAC light is your furnace, AC, or heat pump talking to you. Think of it like a Morse code. Depending on the brand you have installed in your home, such as a Bryant furnace or a Carrier furnace, and the frequency of flashes from this light, you can easily understand the corresponding error your furnace is telling you.
HVAC Error Codes By Brand
There are many different HVAC and Heat Pump brands, each with a blinking error message. However, don’t feel that, as a homeowner, your job is to crack the code. The below tables are for your convenience.
As seasoned HVAC experts with over 75 years of experience in Valparaiso, we have compiled error codes from the HVACs our techs work on every day.
Crown Wheele likes to align itself with educated customers, and our customers appreciate such tables and informative content. But for those that want their HVAC fixed with minimal involvement, give us a call 24/7/365, and we’ll take care of the rest.
Links for Every HVAC Repair Code
Bryant HVAC Error Codes And What They Mean?
What Does the Blinking Light on My Carrier HVAC Mean?
Trane Furnace Error Codes And What They Mean
What Do Flashing Red Lights Mean On Goodman Furnace?
York HVAC Error Codes
What Does the Blinking Light on my Lennox HVAC Mean?
American Standard Furnace Codes
Common HVAC Repair Issues | Interpreting Blinking Red Light
If a red light on your HVAC blinks repeatedly, it means something is going wrong. The red blinking light can indicate several problems or malfunctions with your HVAC, so you’ll want to contact Crown Wheele to ensure the issue isn’t a safety concern or will cause severe problems later.
Here are some of the most common causes issues to throw an error code:
No Signal From the HVAC’s Thermostat
Flashing lights could indicate that your thermostat is not getting a signal to your HVAC, AC, Heater, or Heat Pump. An issue with your home’s wiring or a loose connection can cause this problem.
Your Crown Wheele HVAC Technician will run a diagnostic test and ensure the connections are secure. If everything tests ok, the tech will replace the thermostat.
No Power to HVAC
If you don’t see a blinking light, it could indicate that your HVAC is not getting power. Your Crown Wheele HVAC repairman will suggest you check your circuit breaker box before coming out.
If the breaker is good, and you still need to get power to your heater, air conditioning, or heat pump, please call us immediately. Our technicians are happy to come out at any time.
HVAC Flame Failure
This issue means there is not enough gas or air to keep the flame ignited. This problem could happen because your filter needs to be replaced, your burner chamber and tank have issues, a damaged burner or too much pressure in the combustion chambers.
Ensure all the filters are clean, and replace them if needed. Ensure no debris is blocking any parts of the burner chamber or tank. Most HVAC issues can often be eliminated with regular maintenance and diagnostic testing.
Igniter Failure
If your HVAC can still ignite, your tech will check and see how many flames on your gas burner are not working. If they see ignition failure, they will change or repair the igniter.
This switch sends a spark near the pilot light to ignite each flame. If the tech sees no flames, it is likely a furnace lock. This is critical and your tech will replace it immediately. Crown Wheele prioritizes stocking these replacement parts to keep our customers safe.
Pressure Switch Problem
The HVAC’s’s heat exchanger and inducer are two components that ensure the system is venting harmful, dangerous gas. This is an example of why you’ll love the confidence that comes with Crown Wheele’s certified HVAC technicians.
Problems with pressure switches can also indicate that a condensate drain is plugged or there is another type of vent blockage. Expertise in ventilation is a critical and differentiator between Valparaiso’s best HVAC companies!
HVAC Gas Valve Issue
You may have a problem because the gas coming in through your gas line and feeding into your combustion chambers does not have enough pressure to ignite.
High Limit Switch & Roll Out Switch Furnace Repair
On the inside of your heating system, numerous roll-out switches monitor for heat where it isn’t supposed to be. The heat sensors are switches that determine when the heat exchanger is too hot. The high-limit switch watches the temperature in the heat exchanger. If you have a high-limit switch error indication, your Crown Wheele tech will check if your furnace filter needs to be changed.
HVAC Circuit Board Failure
The best Valpo HVACs come with the best diagnostic testing tools and expertise in electrical. It is not uncommon for older homes in Valparaiso and Chesterton to have severe damage done to their HVAC circuit board or something electrical that has come loose inside of your furnace or heat pump.
Crown Wheele invests in training, certifications, and the best diagnostic testing tools because more problems could happen very quickly if they are not caught in time!
Voltage Issue
Flashing lights on your heating system may also mean a voltage issue.
HVAC REPAIR | FAQ
Why is my HVAC blinking?
Gas pressure issues can often result in a blinking furnace light, indicating that there is a problem with the system. Gas pressure must be maintained at a specific level within the furnace to ensure proper operation and safety.
What do the lights on my furnace mean?
Typically, your furnace light is a solid amber or yellow color, which tells you everything’s good inside the furnace. A blinking red light means something’s not right. The trouble can range from an easy fix, like a tripped breaker switch, to something more serious, like a problem with the gas valve.
Why is the red light blinking on my HVAC system?
Gas Pressure Issues
If it is too high, the unit may be at risk of overheating, affecting the interior components. In both situations, expect a red light to blink — an indication that an urgent furnace inspection is due.
What to do if the AC is blinking?
If you see the light flashing, try turning off the power to your air conditioning unit and then turn it back on. This can sometimes fix small electrical problems. But if it keeps happening, don’t wait to call an expert for help with electrical wiring or a circuit board check-up.
Why is my HVAC light blinking 3 times?
A 3 flash is a draft pressure switch issue. If the draft fan is running, the question is, do you have a bad switch a , weak fan, or a blocked exhaust vent? You can check the vent for blockages and also the vac tubing connected to the switch. Be sure the tubing is not kinked, deteriorated, or doesn’t have water in it.
Certified HVAC Repairs from Bryant’s Authorized Bryant Dealer
As an authorized Bryant Dealer and one of Valparaiso’s longest-running businesses, Crown Wheele is uniquely qualified to help keep your family safe and comfortable.
In 75 years of helping people with HVAC solutions, we’ve learned a lot, most significantly the importance of doing the job right the first time. It’s the cornerstone of everything we do! That’s why we believe it’s our job to help our customers find the right Bryant Heater or AC.
Papa Wheele once said, “we make friends from sales, we keep them through service.” We aim to help you find the best furnace, air conditioner, or heat pump, and then be there when you need us for maintenance, service, and repairs.
Checking to see where this goes.